RCU Forums - View Single Post - P-80 temp-probe probably gone
Thread: P-80 temp-probe probably gone
View Single Post
Old 07-21-2015 | 09:44 PM
  #4  
morwan_gsm's Avatar
morwan_gsm
 
Joined: Feb 2011
Posts: 73
Likes: 0
Received 1 Like on 1 Post
From: Alexandriya, Egypt
Default
this happened to me before in may P80, closely check the temp probe board and find the two small probe wires soldering spots on the board, they may be disconnected due to improper engine handling while installation/storing or transporting, then carefully solder them again if required. don't forget to re-calibrate the temp prob from the GSU
morwan_gsm is offline  
Reply Like