I've recently upgraded my engine on my buggy and it came with a 3 shoe clutch in which I've never delt w/ one before. Every clutch before for this has had a 2 shoe w/ a spring. Anyway I am trying to install this so I looked up some YouTube videos on how to do so. In the videos they get the springs to lock into the bolt holding down the flywheel, and my springs don't seem to do so. I can place the shoes w/ the springs attached right onto the shoe posts no problems but no locking. I can put the clutch bell right on top and it seems to spin freely. Don't want to hook up the engine tho because I feel I haven't done something right. Can some1 shine a light on this subject for me if they can.