spacing for road wheels is the easy part!

Im trying to figure out what sort of radio gear to use. been digging around and have a few heli radio's still that offer enough channels to operate.

Going out on Saturday to hobby lobby to see if i can find some more styrene and more sheet aluminum. hobby shops are becoming more and more rare around me and the ones that are open don't really stock anything. Ive been in contact with a few due to driving an hour and the shop having such little stock that they don't have simple building or model supplies, but have a 1400 dollar T-rex heli.

I am also searching for either an M48 hull or an extra M26 hull.

I went to home depot this evening and picked up more bits for my dremel. I also picked up a mini lathe that i will be setting up at my girlfriends parents garage since they are close by. I attempted to make a few road wheels at work but the bits i have to work with there are designed for much larger pieces.

I also spent about 30 minutes working on my Tiger 1. Found out my tx01 board is junk so i made some of my own circuits up to get it running. Should be painting this weekend depending if i get my shipment in on Thursday or Friday.