Hi Dan,
The canopy is all my doing. They don't supply anything for making the canopy operate. The speed boards where also all done by myself after looking at how Ali's where done on his.
The canopy was an after thought after it was suggested that i should have it operate. So i took on the challenge and was able to get it done.
The electronic ram is made by a company in Canada called Firgelli Technologies. It is a linear actuator that you hook up to an electronic control board that they sell to turn it in to a servo actuator that runs thru your receiver. They also have some that are made just for RC Use but the stroke wasn't long enough on them for my use.
Last edited by Greg Wright; 12-08-2015 at 01:03 PM.