RCU Forums - View Single Post - Turbine setup with a JR28x

12-21-2015 | 03:45 PM

#6

smeegarn

Member

Joined: Sep 2003

Posts: 45

Likes: 0

Received 0 Likes on 0 Posts

From: Westbrook, QLD, AUSTRALIA

Hi,

I have 5 jets set up on my 28X (all Kingtech) and set them up as per the ECU eg idle is at middle trim setting, off is low trim setting. I have had no issues with this setup. Set fail-safe up on the RX at either off or idle with loss of signal. From memory the ECU goes to idle with loss of signal anyway,

happy flying

Peter

Reply Like