So I am in the process of installing the airline on the speed brakes and the gear doors. well I have a major issue that is just pi@#ing me off that I can stand it. FB doesn't know how to install screws in the correct orientation so that some could get them out. I also noticed that one of the nipples on the speed brakes is broke off but I cant get the cylinder out due to the screw head being in the wrong direction to get to. Its the same thing on the landing gear door. I am not sure how I am going to get them out without messing up the area. I just emailed Catherine at FB to let her know that she needs assist in this issue. Also I am working on the setting up the cockpit but I am trying to figure out how I need to cut it. Do I need to cut on the fuse. also? I am not sure. Please help. Please see photos of the screws for cylinders and the cockpit. Also I got the quick disconnects for the airline and man it was tough to get them on. See picture for that. I hope it looks okay. I can tell you that lines are not coming off them at all. I almost felt as if they were too big for the 3m line but on dreamworks its says it fits 3m.