RCU Forums - View Single Post - Best Giant Scale 3D airframe?
View Single Post
Old 05-03-2002 | 02:01 PM
  #3  
Troy Newman
Senior Member
 
Joined: Dec 2001
Posts: 2,429
Likes: 0
Received 3 Likes on 2 Posts
From: Goodyear, AZ
Default H9 33% limited edition kits

I have both the H9 Extra 330L and the Cap 232 and they are capable of 100% TOC quality flying if your thumbs and fingers can move that way.

The Extra is a little heavier than the CAP but I'm at 6000ft in Denver and they are both great 3D planes that don't cost 6k to get started.....In fact the planes are superb at $800 as an ARF....The you stick a $1000-1200 motor setup or even the recommended GT-80 if your at lower altitudes and it comes in under $1000. Then top of the line servos and your in the air for around $2500-$3000 Then if you have the motor and servos you could upgrade to a newer plane for the $800 kit price...


H9 has a new SU-31 that is going to make a big name for itself.....Its sexy and from what I have heard talking to the guys flys awesome. Hangar 9 is really getting it together with the right tool for the job. I have flown several of the ARFs at the 33% class and many of them fly well.....but I think most that have the CAP will agree they are excellent price and in some cases perform better. Look at the posts over the past few months of the guys flying the Cap232 from H9 and you will get others opinions as well.


Troy Newman
Team JR