Continue the Assembly. I decided to install the equipment before you hang plenkoy.

[ATTACH]2212538[/IMG]

[ATTACH]2212539[/IMG]

Steering height via two traction.

[ATTACH]2212541[/IMG]

[ATTACH]2212543[/IMG]

[ATTACH]2212545[/IMG]

Balsa, in the places of attaching levers, impregnated with glue CA

[ATTACH]2212547[/IMG]

[ATTACH]2212549[/IMG]

[ATTACH]2212551[/IMG]

[ATTACH]2212553[/IMG]

[ATTACH]2212555[/IMG]

[ATTACH]2212557[/IMG]

We paste.

[ATTACH]2212559[/IMG]

[ATTACH]2212561[/IMG]

Pine corners to increase the cross-section of the suture.

[ATTACH]2212563[/IMG]

[ATTACH]2212565[/IMG]

[ATTACH]2212567[/IMG]

A hatch for access to the lower part of the fuselage.

[ATTACH]2212569[/IMG]

[ATTACH]2212570[/IMG]

Axle of the chassis, stud M4.

[ATTACH]2212572[/IMG]

[ATTACH]2212574[/IMG]

[ATTACH]2212576[/IMG]

[ATTACH]2212578[/IMG]

The tail wheel stand is in common with the rudder axis.

[ATTACH]2212580[/IMG]

[ATTACH]2212582[/IMG]