Continue the Assembly. I decided to install the equipment before you hang plenkoy.

[ATTACH]2212540[/IMG]

[ATTACH]2212542[/IMG]

Steering height via two traction.

[ATTACH]2212544[/IMG]

[ATTACH]2212546[/IMG]

[ATTACH]2212548[/IMG]

Balsa, in the places of attaching levers, impregnated with glue CA

[ATTACH]2212550[/IMG]

[ATTACH]2212552[/IMG]

[ATTACH]2212554[/IMG]

[ATTACH]2212556[/IMG]

[ATTACH]2212558[/IMG]

[ATTACH]2212560[/IMG]

We paste.

[ATTACH]2212562[/IMG]

[ATTACH]2212564[/IMG]

Pine corners to increase the cross-section of the suture.

[ATTACH]2212566[/IMG]

[ATTACH]2212568[/IMG]

[ATTACH]2212571[/IMG]

A hatch for access to the lower part of the fuselage.

[ATTACH]2212573[/IMG]

[ATTACH]2212575[/IMG]

Axle of the chassis, stud M4.

[ATTACH]2212577[/IMG]

[ATTACH]2212579[/IMG]

[ATTACH]2212581[/IMG]

[ATTACH]2212583[/IMG]

The tail wheel stand is in common with the rudder axis.

[ATTACH]2212584[/IMG]

[ATTACH]2212585[/IMG]