RCU Forums - View Single Post - Inhibiting a switch or surface when another switch is in a certain position? (18SZ)
Thread: Inhibiting a switch or surface when another switch is in a certain position? (18SZ)
View Single Post
Old 01-11-2021 | 07:08 PM
  #5  
Ron S's Avatar
Ron S
My Feedback: (2)
 
Joined: Dec 2001
Posts: 2,243
Received 207 Likes on 127 Posts
From: Fort Worth, TX
Default
Hi Bill,
I've been using Futaba ever since about 1983. But first time I've had a real need to use conditions - I normally use PMixes.. This model is a different beast though..

I ran your suggestions on the model, and it works great! I had to add a proper offset value to drive the flap to the proper 0 degree deflection on the AFR screens, and also added a Speed In/Out value on my wings Fwd Condition, but now I can operate the switches freely without creating a clash condition. I really appreciate the help!!
Ron S is offline  
Reply Like