So another thing I am thinking. I am using the CMJJets tank and as we know there are no baffles. However, they put a brass tube between the clunk and the outlet. I understand this is done so the long clunk line wont tangle, but its usually done so the clunk cant flip to the front of the tank and get stuck. And that is what it keeps the clunk from doing....
Given this tank is a big cylinder, Im wonder if I only need an inch or so of brass tube instead of the 6 inches they got there. This will allow the clunk to fall into the forward portion of the tank in a dive and say in the fuel.
Im thinking this could be ok mainly because this tank while a cylinder, is basically a big cube of equal dimensions. Thoughts?