Hello.

Hopefully this thread isn’t totally dead. I just acquired this airframe from a fellow modeler. Actually it was given to me. He didn’t know what it was and it turns out it’s a mostly built, SS40 twin. One thing I noticed is that it’s a heavy airframe with the nacelles adding a lot of weight. I’ll have to open them up to inspect/refresh the fuel tanks and hog out the balsa to try to shave off some weight. I have a few engine options, 25FX’s, 25fsr’s or 32fsr’s with the 32’s being my first choice. But I’m sure the 25’s would work well too.
Anyways, if someone is still out there feel free to chime in with comments, advise or just to say hi.