RCU Forums - View Single Post - Build with magnets (instead of pins)
Thread: Build with magnets (instead of pins)
View Single Post
Old 12-07-2003 | 11:18 AM
  #4  
jboy381-RCU's Avatar
jboy381-RCU
Senior Member
 
Joined: Oct 2002
Posts: 977
Likes: 0
Received 1 Like on 1 Post
From: Creedmoor , NC
Default RE: Build with magnets (instead of pins)
ORIGINAL: CafeenMan

My building board is the one that I DO NOT RECOMMEND by Great Planes. I called around to local metal shops and found that I can get a piece of the same metal for less than $10. A sheet of 1/4" x 3' x 6' steel PLATE was about $80. I have no idea if that is a good price or not, because I only called one place to get a rough idea.

try steel scrap yards...they have a lot of stuff to pick from...
john
jboy381-RCU is offline  
Reply Like