RCU Forums - View Single Post - Scratch Designing RC Airplanes

01-26-2004 | 12:14 PM

#23

ramrod25

Member

Joined: Dec 2002

Posts: 60

Likes: 0

Received 1 Like on 1 Post

From: Fort Towson, OK

RE: Scratch Designing RC Airplanes

CafeenMan - The servo is a GWS SOT3 (I think that's right - going from memory) - it's a standard size servo - puts out 111 oz-in at 6 volts - my aileron is about 2 1/2" x 18" - so roughly 45 sq in. I just used standard Tower Hobby 44 oz-in servos for the flaps (one per flap). Used the same GWS servos for the rudder and the elevator.

Ramrod25

Reply Like