Randy it is 6 mos old but I have been checking and I'm sorry for not responding sooner. I work for the state and have been in construction in the summer then went to plowing snow. This is the first weekend I have had in about 4 mos. I had to cut the tail off and started to rebuild a new elevator. Well after getting almost done I started looking at what all of you had said and I have all the wood to do the wing but one side of the wing is covered and I think it is a scale wing angle it has this big thick piece of ply wood that goes threw the center to give it, its angle. Well the whole story wrapped up is I'm going to sell it to someone (I hope) that knows about this plane so it will make a flight someday. I'll be putting on ebay so if interested look for it and again thanks for all of your help.