Let me start off by saying im not very experienced when it comes to electric motor and battery combos. Here is my delima.....I bought a Shockflyer and have put a GWS 370 motor,gear drive, 10X4.7 GWS prop and a 15 amp esc that a friend gave me. I have a 3C 580mah li-poly batt that gives me awsome full power for about 20 seconds and then starts to trail off to about 35-40% power within a couple of seconds(also batt , is warm to the touch...not hot, just warm). I also noticed that when I leave it at a low power setting the RPM's will start to slowly increase and if I punch it it has alot of power/rpm again just for a few seconds and then trails off again. I have a 2c 700mah li-poly that obviously does not have the max power of the 3c but at least keeps constant rpm at full throttle which by the way is more than the 3c after a couple of seconds.
I would like to hover this little shock flyer so help me out guys...where have I gone wrong? Also, im not interested in putting a brushless motor in this airframe.


Thanks, Ken