RCU Forums - View Single Post - arerobird trimming
View Single Post
Old 04-05-2004 | 05:19 PM
  #4  
kevjud
Member
 
Joined: Dec 2003
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
From: Granger, IN,
Default RE: arerobird trimming

It sounds like the tail screws need to be adjusted. Read in the manual, it will explain it. If it climbs too much, back out the front screw one turn, and turn in the rear screw one turn. Try it and if it still climbs too much, repeat the adjustment. I have an Aerobird and you have to do this everytime you put on a new tail.