RCU Forums - View Single Post - Viperjet vertical stab shears on maiden
Old 04-13-2004 | 12:21 PM
  #15  
SAP_2000's Avatar
SAP_2000
 
Joined: Apr 2003
Posts: 1,444
Received 0 Likes on 0 Posts
From: Stabekk, NORWAY
Default RE: Viperjet vertical stab shears on maiden

ORIGINAL: BlackCloud

Finally got the Viperjet ready after going over it and over it for a long time. With the kind assistance of one of the most experienced pilots in turbines at the controls for the test flight all went pretty smooth until about 3 minutes into the flight the vertical stab and rudder decided to depart the airplane. Still controllable, a flapless emergency landing was made.
First: Great job done by your test pilot getting it down in one piece

I too was a nanometer away from loosing mine on the maiden when it ripped LE of a aileron open in flight. Later it de-laminated one aileron and the metal mounting blocks for the wings got loose from the former in the fuse. There has been far to many *incidents* with the Viper by now. Too bad, because it is such a beautiful plane.

Would I buy it again....? -H*** no![&o]
Attached Thumbnails Click image for larger version

Name:	Sq47870.jpg
Views:	49
Size:	26.7 KB
ID:	121818   Click image for larger version

Name:	Kf13867.jpg
Views:	46
Size:	31.2 KB
ID:	121819   Click image for larger version

Name:	Wb76741.jpg
Views:	50
Size:	50.0 KB
ID:	121820   Click image for larger version

Name:	Tn32737.jpg
Views:	42
Size:	44.4 KB
ID:	121821