Steve, Thanks for all of the help on this thread. Just finished mine today. A little heavier than I hoped at 10lb 12oz, but I used the stock landing gear & wing and stab tubes. I moved the wing tube back 1/2" and stab 1/2" down. Set up with std pull-pull rudder and a single elevator servo. JR 8411 elevator and rudder 9411 on ailerons and 537 throttle. 5 cell 1450mah pack w/6v regulator.OS 140 and Bolly MF590. Monokote and PPG paint. Hope to fly this weekend. Thanks again