Full Brushless (100%) Dragonfly - Version 1.0
Hi all
Here are some of the pictures I took just now.
Configuration:
Main Motor = Himaxx HA2015-4100
Main Motor Controller = Castle Creations PHX-10
Tail Motor = Home Mod CDROM motor. Recoil to 10 Turns per pole.
Stock Magnet
Tail Blades = GWS EP-4025 but cut down to the lenght of EP-3020.
Tail Motor Controller = Castle Creations PHX-10
Special Feature: Tail can accept various GWS blades.
I know this chopper is not the prettiest in this forum so please don't complain.
Flight Time = Hover around 1 to 2 feet from ground for at 17 to 18 Minutes in Kokam 3 Cells 1500mAH.
Super-Hornet