RCU Forums - View Single Post - Setup/Mods to Kyosho Flip 3D
View Single Post
Old 06-01-2004 | 02:42 PM
  #6  
Ian.W's Avatar
Ian.W
Senior Member
 
Joined: Jun 2003
Posts: 4,285
Likes: 0
Received 0 Likes on 0 Posts
From: Essex, UNITED KINGDOM
Default RE: Setup/Mods to Kyosho Flip 3D

yes, thae UC always comes off, a very very week point of all the flip i know of. the fire wall has come off in lille accidents aswell, like in a cartwheel when i fell out of a hover after a tail tap, ie very low. the second time happend the flight before this, it was on a harrier landing that i got too close so i had to ditch it in from meby a couple of onches from my tail to the deck. both tiomes it had just come off the at the top, but ont his quite slow inv spin (took about 5 secs to srom 25 feet, meby 5 turns in total aswell) it came strait off.

and yes, thats always going to be the final word, a 3D palen is ment to fly, not to crash in any means.

Ian

PS, i fogot to mention, the 148s gears didnt strip, they jumped, so i had no stripping, just aloot of movement, and controll in one way