RE: Flip 3D Help
I too just crash my Flip today. I was hovering 20 ft high w/ 10 mph cross wind and kind of in the sun, and it started to fall off, I pulled full up elevator to loop out of it, except it went the opposite direction from what I expected, thanks to the symmetrical color scheme. I did pulled it to level before it hit the ground, but it did a mini tip stall and the wing tip got the ground @ flying speed. Although I throttled back at moment of touch down, the momentum did break the fuselage aft of the wing. The only thing connecting the front half to the rear half were the servo extensions and antenna. Well, my Flip was getting beat up anyway, as the wing dowel no longer positively locate the wing to fuselage. I did enjoy my Flip through the year, but I now like profiles better. The Flip's specialty is in, well, flips. It does the tightest waterfall out of all my planes.