RCU Forums - View Single Post - will this stuff work on the shocky
Thread: will this stuff work on the shocky
View Single Post
Old 06-25-2004 | 08:19 AM
  #1  
suitcase's Avatar
suitcase
Senior Member
My Feedback: (1)
 
Joined: Jun 2003
Posts: 983
Likes: 0
Received 0 Likes on 0 Posts
From: Wingina, VA
Default will this stuff work on the shocky
anyone using these parts and are they good? I use the Futaba 6XAS radio.

CRX-M7 Receiver Type: 7 Channel Single FM Conversion
Range: 1.6Km (Full Range)
Operating Voltage: 3.5V - 6.0 V DC
Size L x W x H: 30 x 18 x 9.5 mm / 1.2 x 0.7 x 0.4 in.
Weight with case: 8.8 grams / 0.31 oz.
Weight with case
and antenna: 9.3 grams / 0.33 oz.
Shift: Negative Shift (GWS/Hitec/Futaba compatible
http://www.balsapr.com/catalog/recei...ductId=U571705

HES-490 Sub-Micro JR/Hitec Dimensions 0.79 x 0.28 x 0.63 in.
20 x 7 x 16 mm
Weight 4.8 grams / 0.17 oz.
Weight w/ Servo Wire: 5.2 grams / 0.18 oz.
Ball Bearings No
Metal Gears No
Torque (4.8V) 10 oz.in.
Transit Time (4.8V) 0.08 sec./60°
http://www.balsapr.com/catalog/trans...ductId=T020701

9 x 7 Slow Flyer Orange Electric Propeller (EP-9070)

All of this is from Hobby-Lobby.
IK2101 - EXTRA 330S SHOCK FLYER
PM220834C - COMBO: AXI 220834 & JETI 08-3P
PM22002 - RADIAL MNT FOR AXI 22 SERIES
IK2202AP - ACCY PACK: SHOCK FLYER BRSHLS
FM7003 - 3 CELL 11.1V 700MAH LIPO PACK (2)
ETC2500 - LI-POLY SMART CHARGER 1-4 CELL APACHE

What else do I need to get it together and flying?
suitcase is offline  
Reply Like