RCU Forums - View Single Post - Need Magic 3D setup guidance
Thread: Need Magic 3D setup guidance
View Single Post
Old 08-18-2004 | 08:57 AM
  #8  
elmshoot
My Feedback: (6)
 
Joined: Dec 2001
Posts: 1,717
Received 35 Likes on 31 Posts
From: Nashville, IN,
Default RE: Need Magic 3D setup guidance
Magics on sail at hobby people for 79.95.
I should mention that I am flying with a webra speed .32 with a mini pipe APC 10x3 and it accelerates straight up. I have a 600 MAH battery pack above my elevator servo it lays flat and rests on 2 rails glued in the fuse. I have 3 oz of weight screwed to the tail for a very aft weight plane.
Sparky
elmshoot is offline  
Reply Like