RCU Forums - View Single Post - Fox .45 disassembly
View Single Post
Old 09-04-2004 | 06:35 PM
  #7  
Sport_Pilot's Avatar
Sport_Pilot
 
Joined: Jan 2002
Posts: 16,916
Likes: 0
Received 1 Like on 1 Post
From: Acworth, GA
Default RE: Fox .45 disassembly

Fox was very inovative with reducing maufacturing costs, its my understanding the barn door backplate was a trick to reduce manufacturing costs. If the wristpin is stuck it could be due to congealed castor oil. If so heating it up may do the trick, or soaking it in fuel or denatured alcohol could also free it up.