RCU Forums - View Single Post - E-Flight Tribute
View Single Post
Old 10-04-2004, 04:45 PM
  #2  
rcfury
Senior Member
My Feedback: (5)
 
rcfury's Avatar
 
Join Date: Oct 2003
Location: Manassas, VA
Posts: 968
Likes: 0
Received 0 Likes on 0 Posts
Default RE: E-Flight Tribute

I just had a e-flite tribute. if you are going to use the stock motor you dont need a 25 amp speed control. go brushless trust me. the e-flite park 370 or the 400 motors are better. then use the 25 amp brushless speed controller.
Another thing replace the balsa elevator joiner with a graphite pushrod. the stock will break with the stress of flying. You have to brace the rear fuse a little. The whole tail section will flutter just in front of the horiz. stab. And that caused a horrific crash. Other than that nice flying plane. Just a bit on the flimsey side.