RCU Forums - View Single Post - Emcotec Regulator & Switch
View Single Post
Old 11-29-2004 | 09:16 PM
  #21  
jmiracle
My Feedback: (9)
 
Joined: May 2002
Posts: 593
Likes: 0
Received 0 Likes on 0 Posts
From: Findlay, OH
Default RE: Emcotec Regulator & Switch

That's excellent.

I'll be ordering a DA100 next month for my 35% carden...I'll ask about the emcotec products then. Right now my thought is to use the dpsi twin because of all the redundancy and data logging capabilities. It's worth it to me to spend a little extra $$$ to give myself the piece of mind that the radio system is truely redundant (even to the Rx).
It's good to hear someone there is knowledgable about the systems...I'm sure i'll be looking for some guidance when I order the electronics system later on.

What made you decide on the mini versus the larger system? I'm curious to get someone else's opinion on this. I'm pretty sure I'll go with the twin for both of my 35%'s after all the reading I did over the weekend...but a little extra research never hurts.

ORIGINAL: avionics12

I spoke with Brian H at DA about the Emcotec systems. They can order any Emcotec product; DA is working on an update for their website to address this. Brian is knowledgeable about the systems and gave me a few tips for setup and use of the Mini LDO I plan on using in my 2.6 Yak. Once again DA customer service excels .[sm=thumbup.gif]