I,m not sure where to ask this but I,ll try here.How do you set up two servos on the rudder,one ch.4 master and other 7 slave?I,ve tried 7 or 5 slave.on two different models in radio and every combo I try,I get only small deflection in one direction on servo on slave.I,ve swapped servos and rx.I get full deflection one way and slight movement the other.I have flaps and ailavators on two of the mixes.I,ve tried 2 different mixes.I'm beginning to think my tx is bad.I have to disconnect my linkage from one servo to fly.I,ve also added "link" in the setup ,no change. Someone please set me stright as this problem has become a mission to solve.I hate to go to "y" connectors and try to mechanically balance them. Dave "
[email protected] ps.I also have Don Edberg's book on the super 8.