I have started my Bee turbine and i get a big hot start when it pops off. The first thing that happens is the glow plug lights and the gas valve opens up and it pops off, and then the starter kicks in and the flame settles down. I would think the starter should start first and then the glow plug and then the gas that way there would not be a big build up of gas in the motor. Can some one help me out there should be some way to set this up in the ecu.I have call Artes jet USA and thay have help me out some, but there are out of Town now and I have call the other dealer ,but he has not returned my phone calls.

Thanks