Glad to hear you are very satisfied with your Artes Turbines. Also, thanks for the post with your experiences. The Artes team thanks you as well. It is important to mention that all Artes Trubines are run and tested at the factory three times prior to shipment. At the end of the final test, the serial number is logged, parameters noted, turbine checked over completely then packed and shipped to Distributor, Dealer or customer. This testing procedure ensures the customer will receive a product ready to install and fly. In the case of WD40's Bees, the issue was part installation and part component;specifically the gas solonoid and one restrictor. The important issue here is, the fact the Artes team, Paul,Eric and Felipe from the factory jumped on this problem immediately. Knowing one person cannot be all things to all people, our combined efforts culminating with Felipe Nieto, General Manager Artes Jet resolved WD40's issues 100% to his satisfaction and within 48 hours! Team effort; it's that simple! We pride ourselves in total customer satisfaction and with a Distributor on the West Coast and a Distributor on the East Coast, the business hours available each day to our dealers and customers is substantial. If we do not have the answer, count on us to get it. And in short order. Again, thanks for using Artes Turbines.

Eric Clapp
JetArtes Gulf Coast
a Distributor of Artes Jets and Micro Turbines
[email protected]
941.468.1246
941.423.9931 alternate