RCU Forums - View Single Post - CF pushrods causing interference?
View Single Post
Old 08-29-2002 | 08:18 PM
  #2  
Thud_Driver's Avatar
Thud_Driver
My Feedback: (1)
 
Joined: Dec 2001
Posts: 1,669
Likes: 0
Received 9 Likes on 7 Posts
From: Victorville, CA,
Default Carbon Fiber rods

Aren't any real issues with the rods vs radios. I have a 30" rod on elevator on one of my planes and the receiver antenna runs in parallel anywhere from 1/2" to 2" away the entire length. The antenna also runs right between the elevator and throttle servo on the same plane. I'm running CF pushrods on my DF and turbine airplanes and am looking to use them exculsively from here on. CST (www.cstsales.com) in Tehachapi is having a summer sale on rods at 10 for $10 in various sizes. I bought 20.

I use Airtonics exclusively. Your mileage may vary with other radios.