ORIGINAL: crownvic
You must have a bad drill press been doing it that way for 18 years and havent made a stir stick yet At least not with a drill press. Made them lots of other ways
Lonnie
I agree with Lonnie....
....I always, as in "always"....never any other way....(always) use the drill press
to "enlarge the propellor stud opening". The trick is to let the drill "self center" at
first, then drill on down through. I have never miss-drilled a prop in 35 years with
a drill press.
(Isn't that what drill presses are for ?
)
FBD.
