My Wild Hare 28% Extra 300LX set-up:

JR 9303 Transmitter (9X in other countries than US)
JR R945S PCM Dual Conversion RX
JR DS8611 servos all around (5) on control surfaces
Hitec 5245 throttle servo (digital - metal gears - mini)
JR 537 standard servo on choke
Airwild Twisted Servo Extensions

SWB Double-Loc Aluminum Servo Arms for servos on all flying surfaces
SWB Pull-Pull Kit for rudder
H9 Titanium Pushrods on Ailerons and Elevators
Nelson control horns
Other miscellaneous hardware (ball links, carbon pushrods for throttle/choke, tygon fuel line, fuel line clamps, in tank felt fuel filter, J'Tec wire clamps, etc)

Three Troy Built Models 2350mah Li-Ion RX/Ign. batteries
Three Duralite 6.0V Fail-Safe Switched Regulators w/heatsink

DA-50R w/ electronic ignition and 3" aluminum stand-offs
MSC 23x8 Wood Prop (for after engine break-in)
MenzS 22x8 Wood Prop (for break-in)
Dubro 24 oz. gas tank w/ gasoline conversion kit

R/C Blimp Carbon Fiber tail wheel
Wild Hare Fiberglass Landing Gear
Wild Hare 28% Instrument Panel
Kavan Air Filled Tires 3.5"
Troy Built Models Carbon Fiber Wing Tube
Troy Built Models Carbon Fiber Ultimate Spinner 3.5"
3W Fuel Dot

Jersey Modeler 2.5 Gallon Fuel Jug (manual crank)
Wing Tote wingbag

Here's the links for almost all the sites I visited to find my parts to make my ultimate 50cc gasser. I can't go bigger for quite a while, so why not go 'best?'

www.troybuiltmodels.com
www.swbmfg.com
www.airwildpilotshop.com
www.wildharerc.com
www.desertaircraft.com
www.wingtote.com

If anyone wants a full listing of parts or prices, please send me a PM and I'll hook you up with my Excell file spreadsheet that has it all.[X(] I also have pictures of all the parts as presented by their manufacturers. Can you tell I've been waiting for a while for my plane to "arrive?" These ships that carry these planes move too slow!