All the same reasons why i wanted to try and go gas. I got the saw for nothing and that is about how much my wife will allow me to spend on my "next project" so an electronic ignition system is out. Wacker engines carrys an adapter and I think I'm going to give it a whirl. I just wasn't sure on prop size. I was thinking an 18-8 for starters. My motor looks identical to a couple of 42 cc motors I've seen on a couple of other threads. The saw said 2.0 cu in though and that is a 33 cc according to Poulans web page. I getting another saw for nothing and I think that it will be more suited since it is a 46 cc and from what I've read it has the coil attached. Thanks for the idea.


" Too poor for the hobby"
Chris