My PW300 is now completed except for the CG and a connection to work the choke. Wgt is 17 pounds. I am not sure what made the wgt to top out at 17 LBS. I installed a Taurus 2.6 with a 1400MAH battery for the ign. I had to install standoffs to clear the engine box. I did not want to cut out for the muffler. My standoffs are 1.5 inches long and 1 inch in diameter. Wgt 3 oz total for standoffs. See photo attached.

I think The airplane is going to be a little Nose heavy due to engine being so far forward. I should be able to work around this okay. I used Radio South 1/4 scale CA hinges on all controls.

Looking for a way to work the choke without a big hole in the cowl. I have enjoyed very much reading about everyones progress on their PW300. I have picked up some good ideas reading these posts. Will advise how she flies.