Call me "chicken"....but...having been down that road of an overly-sensitive setup (a H9 Cap), I have *FINALLY* learned what works for me. And did this on the GP PW Extra

Two sets of servo arms for the elevator servos. The currently installed set allows me to set maximum ATV on the Tx (good thing for resolution and linearity of response) and have a VERY agile precision setup, capable of EVERYTHING *but* "3D".

Then the "other arms" which have the ball part of the ball links, and they are LONG arms, and THEY get crazy 3 D rates. Since I use DuBro High Strength arms, both lengths were in the same package.

Many would say this is a waste, but it allows me two separate setups, and I have two airplanes in memory on the JR 10X. One is the "mild mannered", the other is the crazy deal, and I cannot accidentally flip a switch and end up with disaster. BTDT, and it was VERY ugly.

Just some more ideas and ways to skin the cat from somebody who is REAL conservative/careful/chicken. (and old)