Thanks for the reply Lyndon. I already have my tail servo's and linkages hooked up. Dang. I also mounted my ignition to the side of the motor box. My throttle is on top of the motor box. My choke is inside the motor box. My Ignition duralite pack is on the side of the motor box. I mounted the tank in front of the tube. I have yet to purchase my aileron servos and also my reciever battery of batteries (not sure on this yet). I also think I'm gonna need to purchase a few smartfly equalizers to gang my aileron and rudder servo's.. This is my first gasser obviously, and man, these things are super confusing compared to a 2 meter pattern plane. Thanks for the reply. I hope I can get it to balance with the servo's in the tail, or I'll be moving them forward I guess..