RCU Forums - View Single Post - 3d For this setup
View Single Post
Old 04-22-2005 | 12:29 AM
  #1  
radcast2's Avatar
radcast2
Senior Member
My Feedback: (1)
 
Joined: Sep 2004
Posts: 146
Likes: 0
Received 0 Likes on 0 Posts
From: Rustburg, VA
Default 3d For this setup

Here is my setup I will have to use....Eflite 370 Brushless(4100KV & 5400KV),Eflite Brushless ESC, 4-HS55 servos, Electron 6, Polyquest 3s1p 1500mAh. I want to continue to use the 6:6:1 gearbox, as I have a couple of them adn use the 12X6 and 11x7 props that I have.
I used this setup on a Tribute and a MM panic....never had much luck with the panic but thet ribute I did a few minor 3D manuevers untilt he wind made it a multi pieced airplane. I was really wanting to get an EPP 3D plane this time since I am still a beginer to 3D flying. I was looking at the Zoom Zoom, other suggestions I am open to, as long as I can run the above setup on them, Also the E-Flite Yak 54F 3D ARF &/OR the GP Yak 55 (I know these are not EPP). I thank everyone in advance for any help.

Rich