RCU Forums - View Single Post - SETTING UP Your New VPP
View Single Post
Old 05-04-2005 | 08:36 AM
  #7  
wakle's Avatar
wakle
Junior Member
 
Joined: Jun 2004
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
From: Los Osos, CA,
Default RE: SETTING UP Your New VPP

I did not offer details as we are using the makeshift 1/8" rollpin on the AXI2208-34. Lots of vibration and losses.
Here it is for what its worth, which is very for this setup: all use a 3S GWS 1050 battery.

Original Setup: 9x6 Graupner, 8 A, 16 oz Thrust
Original Setup: Slo Flyer 9x4.7, 9 A, 13 oz Thrust

EVP Setup: 9A, 12 oz Thrust. At 11 A, the thrust is below 10 oz. Obviously not a well balanced system.

I am waiting for the SS shafts (see Levi's recommendations). I will publish data and pictures next week. I will also have data on the Raptor 30/Hacker combination (again, per Levi's recommendations)