Ok, I fixed my slipper and all that good stuff but:
Now i start the engine up and it runs fine but it cuts off at one of a few times: a) when I pull the starter. b) when i push the throttle. and 3) when I get to full throttle. and when it does stay, it goes a mere fraction of the speed it was going before I had to break it down. I changed the glow plug, its all the way on. I know one thing is that after I took my exaust off, the screws dont stay anymore I think its stripped. i was planning on taking it to my lhs but being that im only 14 and dont drive (legally) its going to be hard. So anything you guys can help me with would be great. Thanks yall