RCU Forums - View Single Post - P-51 trailing edge spliting
Thread: P-51 trailing edge spliting
View Single Post
Old 05-15-2005 | 06:51 PM
  #2  
Tall Paul
Senior Member
 
Joined: Jun 2002
Posts: 5,211
Likes: 0
Received 1 Like on 1 Post
From: Palmdale, CA
Default RE: P-51 trailing edge spliting
Spritz some CA in the opened up area, and clamp straight.
Recover the trailing edge, lapping the covering over the trailing edge's top and bottom.
Tall Paul is offline  
Reply Like