Help!!!
Hey,
I am getting my vpp stuff in tomorrow. Tonight I was working with the servo and throttle for the vpp. I am totally new at this heli mode stuff and so far with my Futaba 9C I have got this:
At middle throttle the throttle is turned off. Above middle throttle is where the prop will turn the regular way for normal flight. When I pull the stick back below mid ways it will give it throttle plus reverse the pitch of the prop. So far that is what I have. I am wondering if I am doing this right. Also is there a way I can have a switch for this. So if I flip the switch I will have the setup above and when I flip the switch again it will go to normal mode where when your throttle is all the way back your motor is off and all the way up is full throttle. Please let me know cause I hope to be able to try it out tomorrow!!!!!!!