I am building a Goldberg Wild Stick 40 and am putting a Rossi 53 on it and I have a JR 783 7 channel radio to put in it. I want to use the 4 servo's in the wing and set up the crow on a switch. The software in the radio only shows the crow in the sailplane software and I want to set it up as an airplane. Can someone give me some ideas on how this is done. I guess instead of flapperons the outboard ailerons are mixed as spoilerons because the ailerons need to go up when the flaps go down. Could it be done as a sailplane, would the throttle still work? Thanks in advance for any help. I know Hanger 9 was using this set up on their sticks but I don't know how it was done.