ok, after ages of deciding either to go for the Accel Katana GS40 or save some money for my CA 27% extra, i went w/ the extra. it was bugging my dad that i didn't want to start on it right away and instead wanting another plane so to make him happy i went w/ the extra. i have started one thread in the Giant Scale forum and not much reply, i'm here in the 3D forum asking for help. right now i got $240 and about to spend it all on servos. i'm planing to get...

4 x Hitec HS-5625MG High-Speed 2BB MG Servo S
1 x Hitec HS-5945MG Torque Metal Gear Servo S

what do you guys think. all of these will cost me around $300, i'm now making $40 per week mowing lawn ( yeah, i'm only 15). i'm planning to use a Brison 3.2 engine on this baby, because i heard it was reliable and cheap, i just call a guy at Brison asking how much their engine was he said it was $499. so that's $800 total for engine and servos, not including muffler and assesories.

here are my questions....

i want to have a bolt go through the wing and the wing tube, but i need help w/ that, i don't know how to do this....
and control horn, i need to know what control horn to use, i have hard dowel go through the control surfaces to mount the control horn, but don't know which one to use...
and covering scheme, i need help designing the wing scheme, i have attemped at this, but fail horibly...

thanks for everything

PS. this plane was a trade so i didn't build this plane, i just need to finish it