RCU Forums - View Single Post - Modeltech .25 Extra 300 conversion
View Single Post
Old 06-22-2005 | 05:24 PM
  #52  
StephenT
Senior Member
 
Joined: Aug 2004
Posts: 388
Likes: 0
Received 0 Likes on 0 Posts
From: Sebring, FL
Default RE: Modeltech .25 Extra 300 conversion

Guys

The flight performance was okay with the 14x7 prop and the verticle seemed a little better. The 13x8 and 14x7 prop options seem about equal. Neither as good as I had hoped for.

Back at the shop I pulled a 14x10 from my Avistar. This system change yielded 355 watts or about 90 watts per pound with 28 amps drawn. I will test fly it on Friday AM.

This same system will gave 450 watts+ another plane, I have found that the pieced togather lipo pack can't deliver the load that the nimh pack can.