RCU Forums - View Single Post - Which motor and esc for Tensor
View Single Post
Old 07-11-2005 | 10:52 AM
  #13  
Devin McGrath
Senior Member
 
Joined: Apr 2004
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
From: Rochester, NY
Default RE: Which motor and esc for Tensor

With my AXI 2204/54 I'm running a 9x4.7 GWS prop and drawing 9.5 amps at full throttle I realize this is over the recommended 6.5 amps by allot but I hardly use full throttle during the flight and it has not hurt any of the three motors my dad and I been running like this.