RCU Forums - View Single Post - Hangar 9 Twist 3D
View Single Post
Old 07-23-2005 | 12:38 PM
  #2504  
Lefte's Avatar
Lefte
Senior Member
My Feedback: (1)
 
Joined: Jan 2004
Posts: 270
Likes: 0
Received 0 Likes on 0 Posts
From: Grand Forks, ND
Default RE: Hangar 9 Twist 3D

Hey Pat,
I have mine flaperons set to 20 % and do pretty good. I drop about 1-1 1/2 inches. Might be a little to much starting out...

As for props... I have tried just about all of them, besides a three blade and as with everything it depends on what you're going to do when you fly...3D hit a 12.75 x 3.25 or sim. If you just flying anything should work great, but go higher then a 13 ish blade and you'll hit the blade on either take off or landing...

Lefty
[sm=thumbup.gif]