ORIGINAL: R40Victim
The system was in a NTC3, and he had a standard sized servo arm. I'll be using something similar to what you have, and it's going in an 8th scale car. I don't have it yet, so I can't test in my car yet. I'll have it soon, and will begin testing. Thanks for the suggestions, I was just wondering if any one noticed less travel with the servos that come with the system.
Also today I bought a second spektrum receiver and installed in my savage, and same thing the travel was Ok at 100% no need to take to 125% with a futaba 3305 high torque servo. IMO the standar servo arm are short I always use ofna arms or [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXD671&P=7]dubro arms[/link]