RCU Forums - View Single Post - 2 or 1 aileron servo option
View Single Post
Old 08-03-2005 | 03:26 PM
  #7  
sillyness's Avatar
sillyness
My Feedback: (25)
 
Joined: Jan 2002
Posts: 2,406
Likes: 0
Received 0 Likes on 0 Posts
From: Cabot, AR
Default RE: 2 or 1 aileron servo option

Well... for me the verdict is in.

I just maindened my 35% J'Tec Radiowave Extra 330SX. I used a single 8611A per wing.

The snaps are AWESOME!!! The roll rate (on prescribed low rates) was RIDICULOUS.... I had to turn the ATVs WAY down. I'm actually having trouble with the snaps because they stop SO FAST!!! I've always had to lead the rollout by a little to end up wings level... not with this plane. It stops EXACTLY when I release the sticks... AWESOME!!! It also stops going in exactly the same direction it started in and in exactly the same pitch attitude it started in. The snaps are also VERY fast... too fast almost... I think I need to dial the rudder down a little too.

Anyway... thought I'd share. Lovin' this plane... it's a keeper. I'm hooked on 35%.