RCU Forums - View Single Post - Problem to get correct cg on my GWS Zero
Old 08-08-2005 | 07:44 PM
  #2  
geo8498
Senior Member
 
Joined: Sep 2003
Posts: 327
Likes: 0
Received 0 Likes on 0 Posts
From: pittsburgh, PA
Default RE: Problem to get correct cg on my GWS Zero

I had to add just over 2oz, as well extend my motor stick by 1/2" with a 370 brushless and stock gearbox. That's with a 3 cel 910 kokam lipo. Mine weighs in at 21 1/2 oz w/battery. I thought that it was way too heavy, but it flew. Believe me, it was a crazy nut with a heavy tail before I added the nose weight.